Geometric entanglement from matrix product state representations

An efficient scheme to compute the geometric entanglement per lattice site for quantum many-body systems on a periodic finite-size chain is proposed in the context of a tensor network algorithm based on the matrix product state representations. It is systematically tested for three prototypical critical quantum spin chains, which belong to the same Ising universality class. The simulation results lend strong support to the previous claim [Q.-Q. Shi, R. Or\'{u}s, J. O. Fj{\ae}restad, and H.-Q. Zhou, New J. Phys \textbf{12}, 025008 (2010); J.-M. St\'{e}phan, G. Misguich, and F. Alet, Phys. Rev. B \textbf{82}, 180406R (2010)] that the leading finite-size correction to the geometric entanglement per lattice site is universal, with its remarkable connection to the celebrated Affleck-Ludwig boundary entropy corresponding to a conformally invariant boundary condition.Comment: 4+ pages, 3 figure

A Novel Large Moment Antiferromagnetic Order in K0.8Fe1.6Se2 Superconductor

The discovery of cuprate high Tc superconductors has inspired searching for unconventional su- perconductors in magnetic materials. A successful recipe has been to suppress long-range order in a magnetic parent compound by doping or high pressure to drive the material towards a quantum critical point, which is replicated in recent discovery of iron-based high TC superconductors. The long-range magnetic order coexisting with superconductivity has either a small magnetic moment or low ordering temperature in all previously established examples. Here we report an exception to this rule in the recently discovered potassium iron selenide. The superconducting composition is identified as the iron vacancy ordered K0.8Fe1.6Se2 with Tc above 30 K. A novel large moment 3.31 {\mu}B/Fe antiferromagnetic order which conforms to the tetragonal crystal symmetry has the unprecedentedly high an ordering temperature TN = 559 K for a bulk superconductor. Staggeredly polarized electronic density of states thus is suspected, which would stimulate further investigation into superconductivity in a strong spin-exchange field under new circumstance.Comment: 5 figures, 5 pages, and 2 tables in pdf which arXiv.com cannot tak

Morphological evolution of a 3D CME cloud reconstructed from three viewpoints

The propagation properties of coronal mass ejections (CMEs) are crucial to predict its geomagnetic effect. A newly developed three dimensional (3D) mask fitting reconstruction method using coronagraph images from three viewpoints has been described and applied to the CME ejected on August 7, 2010. The CME's 3D localisation, real shape and morphological evolution are presented. Due to its interaction with the ambient solar wind, the morphology of this CME changed significantly in the early phase of evolution. Two hours after its initiation, it was expanding almost self-similarly. CME's 3D localisation is quite helpful to link remote sensing observations to in situ measurements. The investigated CME was propagating to Venus with its flank just touching STEREO B. Its corresponding ICME in the interplanetary space shows a possible signature of a magnetic cloud with a preceding shock in VEX observations, while from STEREO B only a shock is observed. We have calculated three principle axes for the reconstructed 3D CME cloud. The orientation of the major axis is in general consistent with the orientation of a filament (polarity inversion line) observed by SDO/AIA and SDO/HMI. The flux rope axis derived by the MVA analysis from VEX indicates a radial-directed axis orientation. It might be that locally only the leg of the flux rope passed through VEX. The height and speed profiles from the Sun to Venus are obtained. We find that the CME speed possibly had been adjusted to the speed of the ambient solar wind flow after leaving COR2 field of view and before arriving Venus. A southward deflection of the CME from the source region is found from the trajectory of the CME geometric center. We attribute it to the influence of the coronal hole where the fast solar wind emanated from.Comment: ApJ, accepte

Application of anaerobic granular sludge for competitive biosorption of methylene blue and Pb(II): Fluorescence and response surface methodology

© 2015 Elsevier Ltd. This study assessed the biosorption of anaerobic granular sludge (AGS) and its capacity as a biosorbent to remove Pb(II) and methylene blue (MB) from multi-components aqueous solution. It emerged that the biosorption data fitted well to the pseudo-second-order and Langmuir adsorption isotherm models in both single and binary systems. In competitive biosorption systems, Pb(II) and MB will suppress each other's biosorption capacity. Spectroscopic analysis, including Fourier transform infrared spectroscopy (FTIR) and fluorescence spectroscopy were integrated to explain this interaction. Hydroxyl and amine groups in AGS were the key functional groups for sorption. Three-dimensional excitation-emission matrix (3D-EEM) implied that two main protein-like substances were identified and quenched when Pb(II) or MB were present. Response surface methodology (RSM) confirmed that the removal efficiency of Pb(II) and MB reached its peak when the concentration ratios of Pb(II) and MB achieved a constant value of 1

Carbon and Nitrogen Pools in Soil Aggregates Were Affected by Grazing Component ---- Results from Dry and Wet Sieving Methods

Grazing intensity can affect soil carbon (C) sequestration in semiarid grassland, but less is known about the effects of grazing component (defoliation, trampling, excreta return and their combinations) on the C and Nitrogen (N) in soil aggregates. In this study, a simulated grazing experiment was established in a typical steppe of Inner Mongolia, and we investigated the impacts of different grazing component treatments on the different size of aggregates distribution and their C and N content from dry and wet physical separations. Different soil C fractions were showed in different sieving method. The C content of different aggregate size showed microaggregates (250-53μm, 7-17%)\u3emacroaggregates (\u3e250μm, 4-12%) \u3efine fraction (\u3c53μm, 0.4-3%) when dry sieving method was performed, but wet sieving resulted in the higher C content in microaggregates (6-14%) and fine fraction (5-11%) than macroaggregates (1-5%). N content of different size of aggregates showed similar trend with C content. The results revealed that grazing component had a marked impact on soil fraction and C and N content with the significant decreasing percentage of macroaggregates and their C and N storage under defoliation. Our result indicated that both dry-sieved aggregates and water-stable aggregates should be concerned to evaluate the short-term grazing disturbance on C and N distribution in soil aggregates. Furthermore, we suggest that trampling is critical for the soil compaction, but defoliation may play a more important role in soil aggregation and C storage in grazing grassland

Partial nitrification granular sludge reactor as a pretreatment for anaerobic ammonium oxidation (Anammox): Achievement, performance and microbial community

© 2018 Elsevier Ltd Partial nitrification granular sludge was successfully cultivated in a sequencing batch reactor as a pretreatment for anaerobic ammonium oxidation (Anammox) through shortening settling time. After 250-days operation, the effluent NH4+-N and NO2−-N concentrations were average at 277.5 and 280.5 mg/L with nitrite accumulation rate of 87.8%, making it as an ideal influent for Anammox. Simultaneous free ammonia (FA) and free nitrous acid (FNA) played major inhibitory roles on the activity of nitrite oxidizing bacteria (NOB). The MLSS and SVI30 of partial nitrification reactor were 14.6 g/L and 25.0 mL/g, respectively. Polysaccharide (PS) and protein (PN) amounts in extracellular polymeric substances (EPS) from granular sludge were about 1.3 and 2.8 times higher than from seed sludge. High-throughput pyrosequencing results indicated that Nitrosomonas affiliated to the ammonia oxidizing bacteria (AOB) was the predominant group with a proportion of 24.1% in the partial nitrification system

A Fluorescence Approach to Assess the Production of Soluble Microbial Products from Aerobic Granular Sludge under the Stress of 2,4-Dichlorophenol

In this study, a fluorescence approach was used to evaluate the production of soluble microbial products (SMP) in aerobic granular sludge system under the stress of 2,4-dichlorophenol (2,4-DCP). A combined use of three-dimension excitation emission matrix fluorescence spectroscopy (3D-EEM), Parallel factor analysis (PARAFAC), synchronous fluorescence and two-dimensional correlation spectroscopy (2D-COS) were explored to respect the SMP formation in the exposure of different doses of 2,4-DCP. Data implied that the presence of 2,4-DCP had an obvious inhibition on biological nitrogen removal. According to EEM-PARAFAC, two fluorescent components were derived and represented to the presence of fulvic-like substances and humic-like substances in Component 1 and protein-like substances in Component 2. It was found from synchronous fluorescence that protein-like peak presented slightly higher intensity than that of fulvic-like peak. 2D-COS further revealed that fluorescence change took place sequentially in the following order: protein-like fraction > fulvic-like fraction. The obtained results could provide a potential application of fluorescence spectra in the released SMP assessment in the exposure of toxic compound during wastewater treatment

Biological denitrification in an anoxic sequencing batch biofilm reactor: Performance evaluation, nitrous oxide emission and microbial community

© 2019 The present study evaluated the performance of biological denitrification in an anoxic sequencing batch biofilm reactor (ASBBR) and its nitrous oxide (N2O) emission. After 90 days operation, the effluent chemical oxygen demand and total nitrogen removal efficiencies high of 94.8% and 95.0%, respectively. Both polysaccharides and protein contents were reduced in bound EPS (TB-EPS) and loosely bound EPS (LB-EPS) after biofilm formation. According to typical cycle, N2O release rate was related to the free nitrous acid (FNA) concentration with the maximum value of 3.88 μg/min and total conversion rate of 1.27%. Two components were identified from EEM-PARAFAC model in soluble microbial products (SMP). Protein-like substances for component 1 changed significantly in denitrification process, whereas humic-like and fulvic acid-like substances for component 2 remained relatively stable. High-throughput sequencing results showed that Lysobacter, Tolumonas and Thauera were the dominant genera, indicating the co-existence of autotrophic and heterotrophic denitrifiers in ASBBR

Centrality, system size and energy dependences of charged-particle pseudo-rapidity distribution

Utilizing the three-fireball picture within the quark combination model, we study systematically the charged particle pseudorapidity distributions in both Au+Au and Cu+Cu collision systems as a function of collision centrality and energy, $\sqrt{s_{NN}}=$ 19.6, 62.4, 130 and 200 GeV, in full pseudorapidity range. We find that: (i)the contribution from leading particles to $dN_{ch}/d\eta$ distributions increases with the decrease of the collision centrality and energy respectively; (ii)the number of the leading particles is almost independent of the collision energy, but it does depend on the nucleon participants $N_{part}$; (iii)if Cu+Cu and Au+Au collisions at the same collision energy are selected to have the same $N_{part}$, the resulting of charged particle $dN/d\eta$ distributions are nearly identical, both in the mid-rapidity particle density and the width of the distribution. This is true for both 62.4 GeV and 200 GeV data. (iv)the limiting fragmentation phenomenon is reproduced. (iiv) we predict the total multiplicity and pseudorapidity distribution for the charged particles in Pb+Pb collisions at $\sqrt{s_{NN}}= 5.5$ TeV. Finally, we give a qualitative analysis of the $N_{ch}/$ and $dN_{ch}/d\eta/|_{\eta\approx0}$ as function of $\sqrt{s_{NN}}$ and $N_{part}$ from RHIC to LHC.Comment: 12 pages, 8 figure